Proses Pembuatan Sprocket Adjuster Katazure RS50 B20 Menggunakan Bahan Baja Karbon S45C di PT. XYZ
Main Article Content
Abstract
The process of making the Katazure RS50 B20 Sprocket Adjuster using S45C carbon steel at PT. XYZ is research that explores the manufacturing processes and technology involved in the production of these components. The main raw material, S45C carbon steel, was selected to meet the strength and durability requirements required for applications in sprocket adjusters. This research covers the main stages in manufacturing, including cutting the material, forming processes, heating for hardening, and finishing to achieve dimensions and tolerances that comply with technical specifications. In addition, quality aspects such as dimensional control, hardness and material microstructure are also analyzed to ensure the final quality of the Katazure RS50 B20 Sprocket Adjuster. By using S45C carbon steel material and a controlled manufacturing process, this product is expected to provide reliable and long-lasting performance in practical applications. The results of this research are expected to provide valuable insight into the manufacturing process of complex and important machine components such as sprocket adjusters in the modern manufacturing industry.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
R. Indrawan, B. W. Karuniawan, F. Bisono, D. A. Purnomo, F. Hamzah, and R. W. Jati Pratama, “Rancang Bangun Support and Roll Feeder Steel Plate pada Mesin Laser Cutting,” J. Tek. Mesin Sinergi, vol. 21, no. 2, p. 274, 2023.
I. Pangestu et al., “Analisis Nilai Kekerasan Pada Baja ST37 Pasca Proses Pack Carburizing Sebagai Material Dasar Sprocket,” Tek. Mesin, vol. 4, no. 1, pp. 384–490, 2019.
R. Razali and F. Hikmi, “Pembuatan Prototipe Dongkrak Screw Listrik Menggunakan Kontrol Aplikasi Handphone Via Bluetooth,” J. Din. Vok.asional Tek. Mesin, vol. 7, no. 2, pp. 99–104, 2022.
Harsono, Rio Tri Setyo. "Kinerja Mesin Pengerol Plat Bergelombang." Jurnal Rekayasa Mesin 3.01 (2015).
M. C. Rohim and Yunus, “Rancang Bangun Mesin Pengerol Plat Bergelombang,” J. Rekayasa Mesin, vol. 2, no. 02, pp. 52–56, 2015.
M. E. Firmansyah, “Proses Pembuatan Sprocket Conveyor RS80 Menggunakan Bahan Carbon Steel S45c,” J. SIGMAT Tek. Mesin UNSIKA, vol. 3, no. 2, pp. 61–70, 2023.
O. R. Banjarnahor, R. S. Nababan, S. Sebayang, and E. W. . Siahaan, “Analisa Kekerasan Dan Struktur Mikro Sprocket Dengan Bahan Aluminium 7075-T6pada Sepeda Motor,” J. Teknol. Mesin Uda, vol. 3, no. 2, pp. 117–123, 2020.
A. Wikarta, I. B. Suryo, and M. K. Effendi, “Penerapan Produk Teknologi Traktor Tangan Bertenaga Listrik Untuk Petani,” CARADDE J. Pengabdi. Kpd. Masy., vol. 5, no. 3, pp. 499–507, 2023.
T. C. Wahyudi, E. Nugroho, E. Budiyanto, and M. F. Maktum, “Kaji Eksperimen Pengaruh Variasi Temperatur Pemanasan dan Media Pendingin pada Proses Quenching terhadap Perubahan Kekerasan Sprocket Gear Sepeda Motor Non Original,” Tek. Sains J. Ilmu Tek., vol. 6, no. 1, pp. 17–23, 2021.
A. Wisnujati, “Analisis Perlakuan Carburizing Terhadap Sifat Fisik Dan Mekanik Pada Bahan Sprocket Imitasi Sepeda Motor,” Simetris J. Tek. Mesin, Elektro dan Ilmu Komput., vol. 8, no. 1, pp. 127–134, 2017.
Missa, Chrizel Ervanto, and Peniel Immanuel Gultom. "Perancangan Modifikasi Electric Longboard Menggunakan Mesin Penggerak Roda." Jurnal SPARK 1.02 (2018): 1-6.
Mujahidin and Peniel Immanuel Gultom, “Perencanaan Transmisi Mesin Roll Plat,” Spark J. Mhs. Tek. Mesin D3 ITN Malang Vol. 01, No. 01, Maret Tahun 2018, hal. 16-20, vol. 01, no. 01, pp. 16–20, 2018.
N. Pranandita and M. Yunus, “Merancang Sistem Penarik pada Mesin Pemarut Singkong Menggunakan VDI 2221,” Manutech J. Teknol. Manufaktur, vol. 13, no. 01, pp. 19–24, 2021.
J. Tersedia, A. Rivaldo, I. Susanto, and R. Nugroho, “Jurnal Mekanik Terapan Mencegah Stop Raw Mill Akibat Kerusakan Head Shaft Apron Conveyor 332-AC1,” vol. 01, no. 02, pp. 142– 151, 2020.