Perancangan Roda Gigi Miring Pada Transfer Case Jimmy
Main Article Content
Abstract
The design of the bevel gear in the Suzuki Jimny transfer case is a crucial part of developing the transmission system for this vehicle. The bevel gear is responsible for transferring motion and torque between the pinion and the drive gear, ensuring efficient power delivery and high reliability under various operating conditions. The design process includes the selection of the gear module, the number of teeth and critical angles such as the pressure angle and bevel angle, all of which affect the performance and strength of the gear. The selection of the right materials is also an important consideration to achieve optimum levels of strength and durability. By integrating technology and advanced design methodology, the design of the bevel gear in the Suzuki Jimny transfer case not only guarantees high performance, but also takes into account aspects of efficiency and durability in the use of materials and energy. The results of this design are expected to improve the overall performance of the Suzuki Jimny transfer case, make an important contribution to the development of automotive technology, and form the basis for further research in this field of the design and manufacture of precision engine components.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
H. Panggabean and H. Darmadi, “Besarnya Gaya Radial Yang Terjadi Pada Sepasang Roda Gigi Lurus Akibat Adanya Sudut Tekan Dari Roda Gigi Penggerak Di Alat Double Deck Bunch Crusher,” J. Vokasi Tek., vol. 1, no. 2, pp. 10–16, 2023.
R. A. Siregar, K. Umurani, and M. Mukhlas, “Studi Eksperimen Terhadap Keausan Pada Roda Gigi Cacing Komposit,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 2, no. 2, pp. 158–164, 2019.
Munawar Alfansury and W. Septiawan, “Jurnal Rekayasa Material, Manufaktur dan Energi,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 6, no. 1, pp. 137–143, 2023.
K. Alfiansyah, “Proses Pembuatan Roda Gigi Miring Pada Mesin Kertas,” J. Kaji. Tek. Mesin, vol. 8, pp. 1–8, 2023.
Paryanto and Sudiyatno, “Implementasi Model Assessment For Learning (Afl) Pada Pembelajaran Proses Pemesinan Di Jurusan Pendidikan Teknik Mesin FT UNY Paryanto,” Jptk, vol. 20, no. 1, pp. 2013–2015, 2021.
R. Ismail, N. R. Aprilitama, and S. Sugiyanto, “Pengamatan Struktur Mikro Dan Kekerasan Pada Roda Gigi Pasca Pengerasan Permukaan Menggunakan Pemanas Induksi,” Rotasi, vol. 17, no. 3, p. 145, 2015.
A. Arief Wicaksana, “Analisa Perhitungan Roda Gigi Miring Transmisi Pada Mobil Toyota Kijang Kapsul Sx 4 Speed,” J. Pendidik. Tek. Mesin, vol. 9, no. 1, pp. 63–69, 2022.
Fiatno Aris and Aprizal, “Analisa kegagalan roda gigi lurus ( spur gear ) pada mesin kempa ( screw press ) dan pencegahannya,” Aptek, pp. 45–50, 2015.
A. Anto and D. Gasni, “Analisis Kegagalan Pada Roda Gigi Miring Intermediate Gear 2 Pada Gear Box Untuk Roller Press Milling Machine,” Met. J. Sist. Mek. dan Termal, vol. 1, no. 2, p. 55, 2017, doi: 10.25077/metal.1.2.55-69.2017.
A. Abdi Rullah, B. T. Samudra, F. T. Rizki, V. Azharis, and J. Prasetyo, “Analisis Karakteristik Roda Gigi Miring Pada Transmissi Kenderaan Roda Empat,” no. March, p. 4, 2019.
R. T. Jurnal, “Analisa Kerusakan Roda Gigi Cacing Pada Gearbox Air Preheater Pltu Ujp Banten 3 Lontar Unit 1,” Power Plant, vol. 6, no. 1, pp. 32–38, 2018.
D. Gusmantoro, E. Erwansyah, and S. Dwi Krishnaningsih, “Pengaruh Media Pendingin Bio Solar Pada Perlakuan Panas Untuk Meningkatkan Kekerasan Roda Gigi Sproket,” J. Inov. Teknol. Terap., vol. 1, no. 2, pp. 359–366, 2023.